| Serial to Ethernet products |
| |
Embedded Device Servers |
| |
External Device Servers |
| |
Modbus Gateways |
| |
Ethernet to CAN-Bus converter |
| Remote I/O Servers |
| |
Ethernet I/O |
| |
RS-485 I/O |
| |
CAN-Bus I/O |
| Industrial Multiport Serial Boards |
| |
PCI Boards |
| |
USB Boards |
| |
PC/104 Boards |
| |
|
| |
|
| |
|
| |
|
| |
|
| |
|
|
|
|
| NETCOM-10I Industrial level 3 in 1 Serial to Ethernet converter device |
| |
NETCOM-10I is a serial to Ethernet converter; it integrates with TCP/IP protocol stack, providing a quick and convenient way for user to enable a normal serial device to access freely to the local network and internet.
The converter is an industrial level product, it can work under an industrial temperature range of 25¡æ¡«75¡æ.it has one 10M Ethernet interface and one RS-232/422/485 (selectable via toggle switch) port; the serial communication baud rate can reach up to115.2Kbps. It has various working modes to suit for different communication requirements, such as TCP Server, TCP Client, UDP, Real COM, Group multicasting, and TCP auto modes. |
-
Serial (RS-232/422/485) to 10M Ethernet & 10M Ethernet to Serial (RS-232/422/485);
DHCP and Static IP Acquisition support.
- Serial RS-232/485/422 selectable via toggle switch and Serial Baud rate is 300bps~115.2bps
- Selectable working modes, such as TCP Server, TCP Client, UDP, Real COM driver, Group Mode and TCP auto mode; also, in these modes, most of the parameters, such as Multicasting address, working port, destination port, destination IP, and port number are configurable by user.
- Provide data grouping for multicasting under Group mode to achieve multiple communications.
- Serial data framing support with two useful framing modes: start byte mode and ending byte mode
- Provide Management software for Real COM driver mode; allow dynamic modification of the serial port parameters, a real implementation of the virtual serial port.
- Provide general function library, very convenient for secondary developments using VC, VB, Delphi, and C++ Builder programming languages.
- Industrial level temperature range (compliant to C2 level standard of the Industrial automation systems and integration---Operating conditions for discrete part manufacturing-equipment in industrial environments)
|
| LAN |
| ¡¡Ethernet |
¡¡10 Mbps, RJ45 |
| ¡¡Protections |
¡¡2 KV isolation |
| Serial Port |
| ¡¡Signal type |
¡¡RS-232 /485/422 |
| ¡¡Number of Serial ports |
¡¡1 |
| ¡¡Interface type |
¡¡DB9 Pin Connector |
| ¡¡Signals |
¡¡RS-232£ºTxD, RxD, GND
¡¡RS-422£ºTx£«¡¢Tx£¡¢Rx£«¡¢Rx£
¡¡RS-485£ºData£«¡¢Data£ |
| ¡¡Protection |
¡¡15KV Isolation |
| Serial port communication parameters |
| ¡¡Parity |
¡¡None, Even, Odd, Space, Mark |
| ¡¡Number of Data bits |
¡¡5£¬6£¬7£¬8 |
| ¡¡Number of Stop bits |
¡¡1£¬1.5£¬2 |
| ¡¡Flow control |
¡¡None |
| ¡¡Communication rate |
¡¡300bps ~ 115200bps |
| Software |
| ¡¡Protocols |
¡¡ETHERNET, ARP, IP, ICMP, UDP, TCP, HTTP, DHCP |
| ¡¡Software tools |
¡¡ZNetCom2 Configuration Software, ZNetCManager Virtual serial port server software, TCP/UDP testing too |
| ¡¡Configuration mode |
¡¡Web, windows configuration software ZNetCom, Serial port configuration |
| Power Supply |
| ¡¡Power Input |
¡¡5V DC |
| ¡¡Power Consumption |
¡¡85mA |
| Physical parameters |
| ¡¡Material of shell |
¡¡SECC metal (1mm) |
| ¡¡Physical Size (W¡ÁD¡ÁH) |
¡¡95*67*26 (mm) |
| ¡¡Weight |
¡¡0.3Kg |
| Environmental Parameters |
| ¡¡Working Temperature & Humidity |
¡¡-25¡æ~75¡æ£¬5~95%RH |
| ¡¡Storage Temperature & Humidity |
¡¡-40~85¡æ£¬5~95%RH |
|
|
|
